Bluetooth Car Kit Bluetooth Car Speaker

Technical parameters:
Rated impedance: 4Ω
Battery: 600mAh
Rated power: 1W
Bluetooth Version: 3.0
Rated voltage: DC5V
Support specification: HSP
Weight: 68 g
Standby time: about 30 days
Dimensions: 95 * 52 * 18mm
Talk time: about 12 hours

Product Features
1 Bluetooth Handsfree communication BLUETOOTH2.1 + DER,
2, high-quality microphone, clearer calls
3, intelligent power-saving target phone automatically disconnect after hibernation
4, ergonomic design large buttons, answer and end a key to complete
5, built-in lithium polymer battery, large battery capacity and long service life
6, high strength stainless steel metal clip, you can mount all the car sun visor, safer and more relaxed

Operations Guide

First, prepare
(1), the product is placed in the right position the car sun visor
Note: Before first use, it is recommended to use the charger drop the battery is fully charged, please refer to "recharge chapter"

Second, the on / off
Power on: long press the power button more than 3 seconds to boot.
LED blue light flashes to indicate that the machine is waiting for pairing status, it will automatically try to connect to a cell phone last, after a successful connection LED blue light.
Off and Sleep
(1), long press the power button to shut down more than 3 seconds.
(2), the native Bluetooth connection with your phone or your phone is out of range goal after 10 minutes, the unit will automatically enter a low-power sleep state, again / off again to start the Bluetooth.
Note: When low battery, orange light flashes until the automatic shutdown will not work.
Third, paired with a connection
The first time you use, please follow the steps below with your Bluetooth-enabled mobile phone pairing and connection
(1), in the off state, long press the power button more than 3 seconds to boot, until the Bluetooth blue lights flashing, enter the pairing state.
(2), first activate the phone Bluetooth function, search for available Bluetooth devices, and select the connection ("BLUEBAY 3000") in the search results list, if the phone prompts for pairing code, enter "0000" to complete the pairing after pairing blue lights often bright.
(3), the machine default boot automatically connect to the last connected over phone.
Fourth, disconnect
When you want to disconnect the Bluetooth connection, you can press the power button more than 3 seconds off or on the phone and select Disconnect "BLUEBAY 3000" Bluetooth connection and voice prompts "Bluetooth off"
Fifth, the use of hands-free calling
(1), access phone
When a call is incoming call, click the "Handsfree key" can connect the call.
(2) end the call
During the call, press the "Speaker Phone" can hang up the phone.
(3), reject
After ringing when a call comes in, press the "Handsfree key" to reject a call
(5), last number redial
In standby mode, press and even the amount of "hands-free calling for keys" to allocate the last number called.
(6), volume adjustment
Call, you can long press "up and down the song" Adjusting the sound to the best results.
Long press a volume increase for the festival, long press on an order to adjust the volume down.

Six: charge
The machine built-in high-capacity battery can be recharged using, before first use, it is recommended to use the charger to the battery is full.
Method one: Use the original USB cable to connect the machine charging port () and the computer's USB port () (computer needs to boot), you can charge;
Method two: Use the original USB cable to connect the machine charging port () and vehicle power adapter USB interface (), and then connected the car charging port for charging.
Charging, long bright red LED indicator when charging is complete the blue LED is off.

Seven, LED lights indicate status
Hands-free status
LED lights indicate status
Bluetooth pairing status
Red and blue lights flashing alternately
Bluetooth connection is successful
Blue light flashing slowly
Low battery
Voice prompts "battery low"
Charging process
Long bright red LED
Charging complete
LED light goes out
Eight. Play phone volume
(1) When the phone with a Bluetooth connection, the phone's music player directly via Bluetooth, short press "Handsfree key" to pause and play, short press "+ -" as the song up and down, press the volume addition and subtraction;
Troubleshooting

1, Bluetooth phone can not connect and silent how to do?
Please consult your Bluetooth audio equipment specifications or instructions, to confirm whether the device supports Bluetooth hands-free calling features, and the corresponding Bluetooth hands-free calling features open, while you may want to see Bluetooth hands-free phone is set to connect the device selected as the B3000 (depending on the mobile operating procedure is different)
2, the machine operator unresponsive how to do?
Use, if there is no response or operation can not switch machines, etc., please make sure whether the machine has power. If no power please charge, if there is still power, try to remove the battery then put it back on to reset the machine.