12000mah emergency Mobile Power car jump starter

Model: HSG00215
Capacity: 7800mAh ~ 12000mAh optional
Input: 13V ~ 18V / 1.0A MAX
Output: 5V / 2.1A MAX, 12V / 4A MAX, 16V / 4A MAX, 19V / 4A MAX
Color: Black + orange, black + green, black + red or OEM
Size: 162.2 (L) * 77.2 (W) * 36.5 (H) mm
NW: 460G
GW: 800G
Packing Size: 260 (L) * 185 (W) * 50 (H) mm
Qty: 8pcs / carton
Carton size: 430 (L) * 270 (W) * 210 (H) cm
FCL Weight: about 7.5KG - (less than 8.0KG)
Certification: CE FCC ROHS etc.

Product Introduction
Products for the Apple iPad, iPad2, iPhone4 / 5 / 5C / 5S, iPod, also applies to Nokia, Samsung, LG, HTC, Blackberry, SONY and other brands and most models MP3, MP4, GPS, Bluetooth speakers, etc. interface microUSB, miniUSB consumer electronics products and notebook computers and other 12V 19V input output devices.
Luxurious and elegant styling, stylish and elegant. Small size, large capacity, whether in the car or at home or office or outside, ready to charge, reducing the need for frequent charging you the trouble.
Exclusive support synchronous rectification boost technology and synchronous rectifier charging technology, 10 years of experience to build high-performance power products. Use ultra-low temperatures.

Key features:
Press a button to open the 5V / 2.1A and 12V / 4A output, open 5V and 12V on the basis of long press the button for 5 seconds, switch to 5V and 16V outputs (16V corresponding orange LED lights up), open 5V and 16V, based on the long press the button for 5 seconds, switch to 5V and 19V outputs (19V corresponding green LED lights up), then 5 seconds can switch to 5V / 12V.

Charging indicator:
The first one LED flash represents about 0-25% of the electricity; the first one LED lit the first two LED flashes, said about 25 to 50 percent capacity; 1st, 2nd 3rd LED lit LED flashes, said about
50 to 75% of the electricity, the first 1,2,3 LED lit LED flashes indicate the first four of about 75 to 99 percent capacity; 1,2,3,4 LED lit represents a 100% charge.

Multiple protection features: hardware protection (three series dedicated battery protection circuit + homeostasis circuit) + MCU software protection, over-current, over-voltage, over-discharge, overcharge, low voltage, short circuit, light-load protection.
* Ignition function
* Highlight lighting function
* LED strobe + SOS function
* Multi-pack voltage output function

Ignition IMPORTANT:
1. Make sure the starter has more than 3 LED grid electricity (more than 80% capacity)
2, the battery clip on the dead car battery to be started (the original battery is not removed), red clip original battery positive, black clip original battery negative, then the cord plug into WPB-CJS01 host.
3, the normal method of operation into the cab ignition to start the car.
4, the first connection quickly after the car starts WPB-CJS01-02 host battery clip cord removed, then the positive and negative battery clip removed, the car starts to complete.
5, in normal use, it is recommended every five consecutive starts to stand for 30 minutes to prolong battery life.
6, it is recommended every 30 days to fully charge / discharge once the battery maintenance and ensure the battery is easy to keep an emergency situation under normal use fully charged state.